1979 Sears GT 18 Tecumseh engine 18 hp rewiring ignition module

Okay before I cover this up put on here is a nice picture the homemade trigger call I got put on there already it's already installed little magnet magnets down underneath there suggested it 15,000th for clearance and this this wire goes over to this new of the control module off in 1985 something or other amid 80s and it matches up with this new coil which is also a mid 80s Chrysler product off of something and that has a built-in resistor and it works with that and now it works with this to run this Sears 1979 GT 18 that's an 18 horse to come.

Engine and the old electronic ignition module which used to mount right here give out I guess it got too hot vibrated too many years they'll make them anymore but here's the substitute that neat little trigger coil that it builds they sent that to me yeah sure didn't want to discard this great 1979 sears GT 18 ok.

The electronic ignition the coil trigger is under the flywheel cover now it's all set at 15 air gap 15,000th and the wire comes out the top of here goes down and comes out right here hooks up to this electronic ignition module the control module 3 terminals have wires go to and over here closer look it's the coil that is a coil off of the same mid-80s Chrysler product with a building resistor that works great with this electronic and homemade trigger coil under here for me and it seems to be working really good I already started it up and it seemed to start real well the only thing different about this serious tractor is I'm going to put a different key ignition in there it'll have a marking with an eye on it I have it hooked up to an L which is lights or a load and it doesn't have ignition when it's trying to crank and start but if you've got a good front engine it'll start anyway, after you let off the key and put it into the on position I think it will start right now to tell you the truth even though I don't have that place them out the coil - on this firewall wrong with the cylinder which is already there of course and out here in the cooler spot I got the control module. This is going to work great.

1979 Sears GT 18 Tecumseh engine 18 hp rewiring ignition module

YT Stats Views: 0 Likes: 0 Dislikes: 0