Aspect Peel & Stick Stone Backsplash Installation

Hello I'm Todd and today we're going to be installing aspect natural stone peel-and-stick tiles you'll want to read our detailed installation guide before you begin arrange your tiles on the floor or a large table this will give you a good idea of your final look there are two easy ways to install these tiles if your wall is clean smooth and freshly primed you can use method 1 simply peel and stick if you don't want to prime your walls you can use method 2 which involves using a liquid adhesive mark a reference line on the wall where you want to begin let's start with method 1 first peel off the back and position your first tile with your reference line press the tile lightly at first and then check your position and then press firmly if a tile is out of position use a putty knife to remove it for method to add a bit of adhesive before installation peel off the back and apply several pea-sized dots to the tile press the tile lightly at first check your position and then press firmly to cut a tile mark the front with a pencil for straight cuts as well as notch cuts you can use the tin snips you can use a table saw or a chop saw for straight cuts to square up edges or smooth out rough spots you can use a file you can leave these edges as is or finish with the trim once your install is complete allow 24 hours before exposing to moisture or heat this tile is natural stone so there is some risk of staining impregnator 's and sealers could offer some protection check out our other videos to learn more about our other products as well as additional helpful hints on installation
YT Stats Views: 0 Likes: 0 Dislikes: 0