Best Rated Energy Suspension 7 10104G Steering Rack Bushing Set for Review

In today's presentation will be showing how to install bushings and a Tacoma rack and pinion steering unit begin the removal of the horizontal bushing by placing a 32 millimeter socket on one side and a 15 millimeter socket on the other place this assembly and the jaws of the bench vise and press the bushing as far as you can once the bushing has been pressed as far as you can with the Vice remove the rack and pinion assembly from the vise and drive the bushing the rest of the way out using a 14 millimeter deep socket and a dead blow hammer to remove the horizontal bushing place the steering assembly on two blocks of wood and drive the bushing out using a 14 millimeter socket and a dead blow hammer notice that this bushing will only come out in one direction because of this washer that is integral with the bushing and sleeve clean both bushing cavities with brake clean and a cloth the vertical bushings or the shorter bushings install one from one side and one from the other once the vertical bushings are installed select the proper sleeve. This is done by comparing the two supplied sleeves with the one that is in the rack and pinion steering assembly being replaced in this application the sleeve with the larger inside diameter is the correct sleeve insert the correct sleeve in the top bushing as far as you can by hand then while supporting the bottom bushing drive the sleeve into place using a dead blow hammer turn the assembly over and tap the bottom bushing back into place if it slid out during the sleeve installation position the first of the horizontal bushings and drive it in with the dead blow hammer turn the assembly over position the second bushing and drive it in in the same way insert the sleeve as far as you can by hand then while supporting the bottom bushing drive the sleeve in using the dead blow hammer if the bottom bushing has come out drive it back in the new horizontal bushing and sleeve assembly does not have a washer integral with the bushing therefore this supplied washer must be inserted in this position when the assembly is installed on the vehicle this bushing is to be installed around the body of the rack and pinion assembly like this that concludes today's presentation we hope these instructions have been helpful if ever we can assist you with any of your off-road needs log on to WWE and off-road calm or call us at 80 1805 6644.

Best Rated Energy Suspension 7 10104G Steering Rack Bushing Set for Review

YT Stats Views: 0 Likes: 0 Dislikes: 0