^ EUREKA UPRIGHT VACUUM CLEANER ^: Eureka AS3030A Airspeed Unlimited Rewind Bagless Upright Vacuum!

This video will help you quickly assemble your new Eureka airspeed unlimited rewind or airspeed exact reach vacuum cleaner in just a few steps and without tools.

You can get up and running in minutes first unpacked a vacuum and identify all the parts you will find a vacuum base backbone and hose candle and turbo nozzle extension wand and crevice tool dusting brush and the dust cup the parts and accessories that come with your vacuum may vary slightly from the model shown here begin assembly by aligning the backbone with the base and pushing it down snapping it into place you should hear it snap when assembled correctly be sure to gently pull up on the backbone to ensure that it is solidly attached next place the handle on top of the backbone and firmly snap into place again gently pull up on the handle to ensure a tight fit your vacuum may come with a hose already attached which means you will not need to complete the following step to attach the hose locate the hose connector and align the tabs with the tabs on the vacuum press the pieces together and rotate clockwise to secure with the hose attached wind it through the hose retainer place the end in the designated hook and press the hose into the retainer clips on the side of the vacuum place the dust cup onto the vacuum by setting the bottom of the dust cup on the circular rest on the vacuum base then push the dust cup toward the backbone to lock into place confirm the dust cup is latched by gently pulling it away from the vacuum your crevice tool will come nested inside the extension wand if it does not place the crevice tool inside the extension wand and attach both to the side of the vacuum in the storage clips next place the dusting brush on the back of the vacuum the turbo nozzle should already be attached to the handle if not clip the turbo nozzle into the holder on the front of the vacuum handle if your vacuum features automatic cord rewind the cord will come stored in the vacuum for manual cord storage wind the cord around the cord wrap hooks on the back of the vacuum your new Eureka airspeed vacuum is now assembled and ready to use if your vacuum features automatic cord rewind pull the cord to the desired length for convenient cleaning for models with manual cord storage use the cord quick-release feature to easily unwind the court when finished vacuuming press the button on the back of the vacuum to retract and store the cord or wind the cord around the cord wrap hooks on the back of the vacuum to recline the vacuum step on the handle release pedal near the base of the vacuum and pull back on the handle step on the power switch to turn the vacuum on to turn it off step on the pedal again to prepare your vacuum for cleaning floors turn the air flow control switch to floor some models feature a brush roll control switch for bare floor cleaning to use take a few minutes and check out the link in the description this may be exactly what you're looking for thanks for watching if you are ready to take action click the link in the description below this video now.

^ EUREKA UPRIGHT VACUUM CLEANER ^: Eureka AS3030A Airspeed Unlimited Rewind Bagless Upright Vacuum!

YT Stats Views: 1 058 Likes: 2 Dislikes: 0
100% Likes
0% Dislikes