TT 500 ignition module

Here's a shot on my profile Yamaha and rolling little closer it's got doors got TT 500 motor and. This is a little jewel right here which is what probably brought you to this video that's an ignition module works with the coil and the magneto off stock equipment off TT 500 as you can see it sets right in there just above and ties into the points put a cover plate here that actually held the points and condenser of this bike that's a nerd sitting in there just about like that remove those install the module all the wiring you got positive wire runs around here hits a butt connector or a bullet connector and your ground wire runs around ties back into itself grounds out to the module fits in under the fits in under the original plate just nice and neat like.

Can't even tell it's there that's the benefits of this thing what it's going to do is now you all the typical problems you have with points ignition system have just one away there's no more trying to clean dirty points no more getting moisture in between your points and a bike not wanting to fire hard to start when it's cold all that stuff just run away compare this thing to a PBL electronic ignition for about 60 bucks pretty good buy and. This is what's going to come in the kit you get a great positive wire we've got a boat connector ground wires got the round connector on the end to drop in under here nice little neat machine screw and a female bullet connector that's what comes in the kit takes about ten minutes to put it on take it five to ten kickbike make it to two three kick by.

TT 500 ignition module

YT Stats Views: 0 Likes: 0 Dislikes: 0