www.genuineguidegear.com - ONYX: Mounting Plates

One of the more unique features of the g3 onyx binding is the mounting plate system the toe and the heel attached to separate mounting plates which allow for several user benefits the first is 33 millimeters of available adjustment to fit a number of different boot sizes the second benefit is that the toe and the heel work together to achieve this adjustment which allows a user to maintain boot center on the ski which is very important to a skier with attention to detail the third feature is that it's very easy to remove the binding completely from the ski for maintenance or easy transport in order to remove the heel from the mounting plate first ensure the binding is in ski mode from here set your lateral release setting to zero then put the binding back into Tour mode and remove the front heel cowling from the binding using the two screws at the sides of the turret slide the heel cowling off and put the binding back into ski mode from here unscrew the adjustment screw until the binding stops moving last step is to slide the binding off of the ski the toe can be set to one of three different positions on the mounting plate to adjust the position simply loosen these screws and select from one of the three positions there's a furthest forward position which is 7.5 millimeters from the middle position which is here and then there's the fully back position which is 7.5 millimeters behind the middle position once these screws are loose iment removal is as simple as pulling the binding offer the mounting plate.

www.genuineguidegear.com - ONYX: Mounting Plates

YT Stats Views: 0 Likes: 0 Dislikes: 0